How To Open My Iphone Xr

Teardown difficulty:
Hard

Duration:
36 min

Recommended tools

Heat gun

Screwdriver Five-point P0.8 mm

Screwdriver Tri-point Y000

Screwdriver Phillips iPhone

Screwdriver Phillips #000

Opening tool / Spudger

Tweezers

Disassembly of the mobile device Apple iPhone XR (Apple iPhone XR A1984, A2105, A2106, A2108) with each step description and the required set of tools.

---

Vadim Popoff

Author, Content manager

Specialist in content creation, distribution and content management.

---

Step 1.

Using the key tool, open the SIM card tray and remove it.

⚠️ Warning!

Do not push too hard this may cause damage.

Step 2.

Using a screwdriver (Star Shape 0.8mm Pentalobe), unscrew 2 screws at the end of the phone.

Step 3.

Step 4.

Using a screwdriver (Tri-Point / Y000 / 0.6mm), unscrew 2 screws and remove the bracket holding the connectors.

Step 5.

Using a screwdriver (Tri-Point / Y000 / 0.6mm), unscrew 3 screws, and remove the bracket holding the connectors.

Step 6.

Pry up the connectors and remove the display module.

Step 7.

Using a screwdriver (Tri-Point / Y000 / 0.6mm), unscrew 3 screws, and remove the bracket holding the connectors.

Step 8.

Pry up the connectors and remove the battery.

Step 9.

Disconnect the connectors and remove two front selfie cameras assembly.

Step 10.

Disconnect the connector on PCB.

Step 11.

Using a screwdriver (Phillips PH000 1.5 mm), and a screwdriver (Phillips iPhone 2.5 mm), unscrew 2 screws, remove the bracket and main camera.

Step 12.

Using a screwdriver (Phillips iPhone 2.5 mm), unscrew 1 screw, and remove the antenna.

Step 13.

Using a screwdriver (Phillips PH000 1.5 mm), and a screwdriver (Phillips iPhone 2.5 mm), unscrew 3 screws, remove the sim holder.

Step 14.

Disconnect the connectors on PCB.

Step 15.

Using a screwdriver (Phillips PH000 1.5 mm), and a screwdriver (Phillips iPhone 2.5 mm), unscrew 5 screws on PCB.

Step 16.

Step 17.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 7 screws.

Step 18.

Remove the frame with antennas.

Step 19.

Using a screwdriver (Phillips 1.5 mm PH000), unscrew 1 screw, and remove the bracket holding the connectors.

Step 20.

Using a screwdriver (Phillips PH000 1.5 mm), and a screwdriver (Phillips iPhone 2.5 mm), unscrew 3 screws securing the loudspeaker.

Step 21.

Remove the buzzer (loudspeaker) assembly.

Step 22.

Using a screwdriver (Phillips PH000 1.5 mm), and a screwdriver (Phillips iPhone 2.5 mm), unscrew 3 screws securing the TapTic vibration motor.

Step 23.

Pry up the connector and remove the TapTic vibration motor.

Step 24.

Using a screwdriver (Phillips iPhone 2.5 mm), unscrew 2 screws and remove the antenna.

Step 25.

Using a screwdriver (Phillips PH000 1.5 mm), and a screwdriver (Phillips iPhone 2.5 mm), unscrew 3 screws, remove the cable with microphones and lightning port.

Step 26.

Step 27.

Detailed disassembly instructions of Apple iPhone XR in the video, made by our mobile repair & service center:

If you have a question, ask us, and we will try to answer in as much detail as possible. If this article was helpful for you, please rate it.

---

Evgenii Kuzmin

Senior maintenance service and repair engineer

Disassembling\Repair has hard complexity and takes about 36 minutes in time.
Our manual is suitable for all models Apple iPhone XR — Apple iPhone XR A1984, A2105, A2106, A2108 released for markets in different countries.

---

---

Back to the list

How To Open My Iphone Xr

Source: https://vrm24.com/instructions/how-to-disassemble-apple-iphone-xr/

Posted by: coopertives1980.blogspot.com

Share this post